2011-11-12 DIY之Marui MPL MPK

Brand: Sovietarmy2012's DIY
Product Code: 2011-11-12 DIY之Marui MPL MPK

我一直对MPL/MPK抱不平,一直想为MPL/MPK讨个公道.最近见到有师兄贴出Marui MPL,我觉得是时候贴文了...

Walther一直引领德国枪支设计,历经沧桑,战后差点亡厂...连PP/PPK也要暗渡马奴兰生产...幸好,强人总是能振作起来.吸取德系枪支生产不易的血的教训,设计出全冲压MPL,射速合宜,精度良好,大有可为...谁知道MPL败在一个设计师也想不到的方面,含恨而终...

若果CS造就了DE,英雄本色使M92推向世界,那么传媒则令MPL万劫不复.

[url]http://www.gunsworld.net/german/walther/mplmpk/mplmpk.htm[/url]

故事暂且说到这儿.

DIY了MPL / MPK八个多月了.

I have always been feeling sorry for the MPL / MPK and always wanted to give the MPL / MPK a fair chance. Recently I saw a post concerning Marui MPL, I think it's my turn to do something …

Walther has been a leader for the German guns designs. Through all the vicissitudes, the factory was almost wiped out after the war ... even PP / PPK had to be produced under the Manurhin’s ... Fortunately, Walter got it’s act together and came up with a sound rate of fire, good accuracy stamped sheet metal design having learnt from the previous complex designs that led to inadequate production numbers…. but only to find the MPL defeated in an aspect that a designer could not imagine, and put an end to it.

If Counter Strike has made the Desert Eagle, like the film “A Better Tomorrow” promoted the M92 to the world, then it was the media that killed the MPL.

[url] http://www.gunsworld.net/german/walther/mplmpk/mplmpk.htm [/ url]

So long for the story.

DIY the MPL / MPK for over eight months.

同期德系枪支的大小对比(全是DIY过)

Comparison of German guns over the same period (all DIY)

同期德系冲锋枪的大小对比,因为UZI被西德用过,也算进去(全是DIY过)

The size comparison of German submachine guns in the same period, because UZI has been used by West Germany, it is also counted (all DIY)

我为了合成MPL,MPK,特别从日本拍卖回4支Marui手拉枪来组合,时值福岛事件.

In order to synthesize MPL, MPK, I bidded 4 Marui springers from Japan at the time of the Fukushima incident.

一支是退壳版,一支是手拉版.日本人改过退壳版,可替换式气缸改成可叉气,可是内部气喉老化,仍可退壳但不流畅.原来想改手拉版为电动,可是4号波箱只差了一点位置才可行,放弃.

One is a shell ejection model, and the other is a simple springer. The shell ejection model was previously modified by the Japanese seller, where the replaceable cylinder was changed to a rechargeable green gas cylinder, the shells could still eject but the internal hoses were aged so the mechanism was a bit glitchy. I thought about converting it into an electric gun, but the room is a bit short to cater to the No. 4 gearbox, so I gave up.

旧版足刻印,又有摺柄,新版刻印又没有摺柄,MPK更停产了.

There were full markings on the old version and it has a folding stock. The new version had neither, and MPK was discontinued.

DIY部份:搜集资料(三个月)>为该开孔的开孔>补上螺丝孔>造假焊缝>镭射刻字>重做拉捍防尘盖,抛壳口>上色

细节不说了

相比以前的枪模开发,现在的厂商实在"趋炎附势".以前的枪模原型款款经典,今天的枪模原型款款吹牛.

每个人也买过Marui的枪,想必每个人也看过Marui的目录,有没有人想过Marui当初为何生产每款手拉枪的原因和每款手拉枪的时代关系和脉落?

所以,别小看手拉枪!

DIY part: Research (three months)> Drill holes where they should be> treading the holes> Fake welds> Laser engraving> Rework on the cocking handle dust cover, ejection port> Coloring

I won't go into details.

Compared with the previous toy gun development, the current manufacturers are really just chasing after the trends. The previous toy guns were classic models, whereas today’s toy gun models are FUDD crap.

Everyone has also bought Marui's guns. Presumably everyone has also seen Marui's catalog. Has anyone thought about why Marui originally produced each handgun and the relationship and epoch of each era?

So don't underestimate the springers!

 

-完-

-Finish-

 

 

 

 

 

Powered by Aim.hk, Web Design, SEO Company